Table of Contents
Advertisement
2.2 Basic Connection
The instructions below describe the basic connection for EMX32.
Main Monitor
(HDMI)
1. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
2. To receive video streams or to manage the IP decoder over network, use a standard RJ-45
CAT5 10/100/1000Mb Ethernet cable to connect the LAN port to the network. Please refer
to 2.4 Connecting the IP decoder to the Network in the User's Manual.
3. Optionally connect a mouse or a keyboard (EKB200) to the IP decoder to control the
system. You can also control the system using the supplied IR Remote Controller.
4. Using the supplied Power Cord with Adaptor, connect one end to the DC 12V port on the IP
decoder and the other end to the power outlet.
1
Main Monitor
(VGA)
Web Remote
Client
ONVIF/RTSP
6
2
3
Network
Mouse or EKB200
Keyboard
DVR
Analog Camera
IP Camera
EMX32
4
Power
supply
Advertisement
Table of Contents
