Table of Contents
Advertisement
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record
which resources are assigned and protects resources from conflict.
peripheral device has a node, which is called ESCD. This node records which
resources are assigned to it. The system needs to record and update ESCD to
the memory locations.
If the Disabled (default) option is chosen, the system's ESCD will update only
when the new configuration varies from the last one. If the Enabled option is
chosen, the system is forced to update ESCDs and then is automatically set to
the "Disabled" mode.
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10
IRQ-11
IRQ-12
IRQ-14
IRQ-15
DMA-0
DMA-1
DMA-3
DMA-5
DMA-6
DMA-7
The above settings will be shown on the screen only if "Manual" is chosen for
the resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus
and provides non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and
peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing "Auto" (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.
By Choosing "Manual", the user will need to assign IRQ & DMA for add-on cards.
Be sure that there are no IRQ/DMA and I/O port conflicts.
These locations (4K) are reserved in the system BIOS.
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
assigned to: PCI / ISA PnP
- 26 -
BIOS Setup
Every
Advertisement
Table of Contents
