Table of Contents
Advertisement
Supply will be used.
There are 3 options: "Former-Sts", "On", "Off".
"Off" (default)
"On"
"Former-Sts"
For example: If set to "Former-Sts" and AC power is lost when system is live,
then after AC power is restored, the system will automatically power on. If AC
power is lost when system is not live, system will remain powered off.
IRQ/Event Activity Detect
If you highlight the literal "Press Enter" next to the "IRQ/Event Activity Detect"
label and then press the enter key, it will take you a submenu with the following
options:
USB Resume from S3/ S4/ S5
This item allows you to enable or disable USB Resume from S3/ S4/
S5.
The Choices: Disabled (Default), Enabled.
VGA
When set to On, any event occurring at a VGA Port will awaken a
system which has been powered down.
The Choices: Off (default), On.
LPT & COM
When this option is set to On, any event occurring at a
COM(serial)/LPT (printer) port will awaken a system which has been
powered down.
The Choices: LPT/COM (default), COM, LPT, NONE.
HDD & FDD
When this option is set to On, any event occurring on a hard drive or a
floppy drive will awaken a system which has been powered down.
The Choices: On (default), Off.
PCI Master
When set to On, you need a LAN add-on card which supports the
power function. It should also support the wake-up on LAN jump.
The Choices: Off (default), On.
Means always set CMOS to the "Off" status when
AC power is lost.
Means always set CMOS to the "On" status when
AC power is lost
Means to maintain the last status of the CMOS
when AC power is lost.
- 23 -
BIOS Setup
Advertisement
Table of Contents
