Table of Contents
Advertisement
The Choices: Half (default), Full.
Use IR Pins
Consult your IR peripheral documentation to select the correct setting
of the TxD and RxD signals.
The Choices: IR-Rx2Tx2 (default), RxD2, TxD2.
Onboard Parallel Port
This item allows you to determine access onboard parallel port
controller with which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default value is SPP.
The Choices:
SPP(default)
EPP
ECP
ECP+EPP
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The Choices: EPP 1.7(default), EPP1.9.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Game Port Address
Game Port I/O Address.
The Choices: 201 (default), 209, Disabled.
Midi Port Address
Midi Port Base I/O Address.
The Choices: 330 (default),300, 290, Disabled.
Midi Port IRQ
This determines the IRQ in which the Midi Port can use.
The Choices: 5, 10 (default).
Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI Slot or an AGP Slot.
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel
Port.
Using Parallel port as Extended Capabilities
Port.
Using Parallel port as ECP & EPP mode.
- 18 -
BIOS Setup
Advertisement
Table of Contents
