Pnp/Pci Configurations - Biostar U8598 Bios Setup Manual

Biostar u8598 motherboard: supplementary guide
Hide thumbs Also See for U8598:
Table of Contents

Advertisement

PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes
to the default settings.
!
Figure 7. PnP/PCI Configurations
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the boot
sequence (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system like Window™ 95. When set to NO, BIOS will initialize all the
PnP cards. For non-PnP operating systems (DOS, Netware™), this option must
set to NO.
The Choices: No (default), Yes.
BIOS Setup
- 25 -

Advertisement

Table of Contents
loading

Table of Contents