Biostar U8668 Pro User Manual

Biostar u8668 pro motherboard: user guide

Advertisement

Quick Links

FCC Information and Copyright
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,
may
cause
harmful
interference
to
radio
communications. There is no guarantee that interference will not
occur in a particular installation.
The vendor makes no representations or warranties with respect
to the contents here of and specially disclaims any implied
of merchantability or fitness for any purpose. Further
warranties
the vendor reserves the right to revise this publication and to
make changes to the contents here of without obligation to notify
any party beforehand.
Duplication of this publication, in part or in whole, is not allowed
without first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without
notice and we will not be responsible for any mistakes found in
this user's manual. All the brand and product names are
trademarks of their respective companies.

Advertisement

Table of Contents
loading

Summary of Contents for Biostar U8668 Pro

  • Page 1 FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,...
  • Page 2: Table Of Contents

    1-1. Hardware... 2 1-2. BIOS & Software ... 6 1-3. Package Contents... 6 2. Mainboard Configuration... 7 2-1. Layout of U8668 Pro... 7 2-2. Component Index... 8 3. CPU Configuration ... 9 3-1. CPU Socket 478 Configuration Steps: ... 9 3-2.
  • Page 3 Table of Contents 4-10. ATX 12V Power Connector: JATXPWR2...18 4-11. 5V / 5VSB Selection for USB: JUSBV3...18 4-12. 5V / 5VSB Selection for USB: JUSBV4...18 5. RAM Module Configuration ... 19 5-1. DDR SDRAM ...19 5-2 SDRAM...20 5-3. How to install DDR/SDRAM DIMM Module ...21 6.
  • Page 4: Notice

    U8668 Pro Features: 1.Contains on board I/O facilities that include a serial port, a VGA port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports and a game port.
  • Page 5: Mainboard Features

    Chipset – VIA VT8751 (P4M266)/ VT8235. Super I/O Chipset – ITE 8705 DRAM Memory: 1.Supports 200MHz, 266MHz DDR SDRAM or PC100, PC133 SDRAM. 2.Supports 64Mb, 128Mb, 256Mb and 512Mb technologies for x8 and 16 devices. 3.The largest memory capacity is 2 GB. Motherboard Description...
  • Page 6 Chapter 1 Motherboard Description Shadow RAM: Motherboard is equipped with a memory controller providing shadow RAM and support for ROM BIOS. Green Functionality: 1.Supports Award BIOS ™ power management functionality. 2.Has a power down timer from 1 to 15 minutes.
  • Page 7 1.Supports four IDE hard disk drives. 2.Supports PIO Mode 4, Master Mode, and high performance hard disk drives. 3.Supports disk transfer rates up to 133 MB/second. 4.Supports Ultra DMA 33, Ultra DMA 66, Ultra DMA 100, Ultra DMA 133 Bus Motherboard Description...
  • Page 8 Supports two back panel Universal Serial Bus (USB2.0) Ports and four front panel Universal Serial Bus (USB2.0) Ports. Hardware Monitor Function: 1.Monitors CPU Fan Speed. 2.Monitors System Voltage. 3.Monitors System Speed. Dimensions (MATX form-factor): 24.5cm x 24.5cm (WxL) Motherboard Description...
  • Page 9: Bios & Software

    Offers the highest performance for MS-DOS, Windows NT, Windows 2000, Windows XP, Windows ME, Novell, LINUX, and SCO UNIX etc. 1-3. Package Contents 1.HDD Cable. 2.FDD Cable. 3.Flash Memory Writer for BIOS Update. 4.USB Cable (Optional). 5.Rear I/O Panel for MATX Case (Optional). 6.Fully Setup Driver CD. Motherboard Description...
  • Page 10: Mainboard Configuration

    Chapter 1 2. Mainboard Configuration 2-1. Layout of U8668 Pro JKBMS1 & Mouse JUSBLAN USB & LAN JCOM1 JPRNT1 JVGA1 JATXPWR2 AGP SLOT PCI SLOT Codec PCI SLOT JCDIN1 PCI SLOT CNR1 CNR SLOT Motherboard Description CPU1 Socket 478 C PU...
  • Page 11: Component Index

    Chapter 1 Motherboard Description 2-2. Component Index Socket 478 C P U P4M266 (VT8751) B AT1 C odec VT8235 ITE I/O...
  • Page 12: Cpu Configuration

    CPU. Match Pin A with the white dot/cut edge then insert the CPU. Press the lever down. Then Put the fan on the CPU and buckle it and put the fan’s power port into the JCFAN1, then to complete the installation. Motherboard Description...
  • Page 13 Chapter 1 Motherboard Description CPU Configuration Layout Socket 478 P4M266 (VT8751) BAT1 Codec VT8235 JSFAN1 ITE I/O...
  • Page 14: Cpu Fan Header: Jcfan1

    Chapter 1 3-2. CPU Fan Header: JCFAN1 Pin No. 3-3. System Fan Header: JSFAN1 Pin No. Motherboard Description Assignment Ground +12V Sense Assignment Ground +12V Sense...
  • Page 15: Jumpers, Headers & Connectors

    Chapter 1 4. Jumpers, Headers & Connectors JKBV1 Socket 478 JATXPWR2 (VT8751) JUSBV3 Codec JUSB3 Motherboard Description P4M266 BAT1 VT8235 ITE I/O JATXPWR1 IDE Connectors (IDE1-2) JUSBV4 JCMOS1 FDD1 JWOL1 JPANEL1 JUSB4...
  • Page 16: Front Panel Connector: Jpanel1

    Connector IRTX SPK (Speaker Connector) An offboard speaker can be installed on the motherboard as a manufacturing option. An offboard speaker can be connected to the motherboard at the front panel connector. The speaker (onboard or offboard) provides error beep code information during the Power On Self-Test when the computer cannot use the video interface.
  • Page 17 (The time required is due to internal debounce circuitry on the system board). At least two seconds must pass before the power supply will recognize another on/off signal. Motherboard Description...
  • Page 18: Atx 20-Pin Power Connector: Jatxpwr1

    IDE2 (Secondary IDE Connector) The IDE2 controller can also support a Master and a Slave drive. The configuration is similar to IDE1. The second drive on this controller must be set to slave mode. Motherboard Description Assignment +3.3V -12V Ground...
  • Page 19: Floppy Disk Connector: Fdd1

    Chapter 1 4-4. Floppy Disk Connector: FDD1 The motherboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 4-5. Wake On LAN Header: JWOL1 Pin No.
  • Page 20: Front Usb Header: Jusb3

    USBP2+ Ground 4-8. Front USB Header: JUSB4 (JUSB4) Assignment +5V(fused) USBP2- USBP2+ Ground 4-9. 5V / 5VSB Selection for KB: JKBV1 JKBV1 1-2 Closed 2-3 Closed Motherboard Description Assignment +5V(fused) USBP3- USBP3+ Ground Assignment +5V(fused) USBP3- USBP3+ Ground Assignment 5V_SB...
  • Page 21: Atx 12V Power Connector: Jatxpwr2

    4-10. ATX 12V Power Connector: JATXPWR2 Assignment +12V +12V 4-11. 5V / 5VSB Selection for USB: JUSBV3 JUSBV3 1-2 Closed 2-3 Closed 4-12. 5V / 5VSB Selection for USB: JUSBV4 JUSBV4 1-2 Closed 2-3 Closed Motherboard Description Assignment Ground Ground Assignment 5V_SB Assignment 5V_SB...
  • Page 22: Ram Module Configuration

    DRAM Type: 128MB/ 256MB/ 512MB/ 1GB DIMM Total Memory (Only for reference) DIMM Socket Location DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB Motherboard Description PC1600/ PC2100 Type required. Module (184 pin) Size with unbuffer DIMMs DDR Module Total Memory Size (MB)
  • Page 23: Sdram

    2.5V. !When you use SDRAM, the memory power will automatically set to 3.3V. For the above settings, you can only use one kind of memory on this motherboard. It is forbidden to insert both kind of memory simultaneously. SDRAM.
  • Page 24: How To Install Ddr/Sdram Dimm Module

    5-3. How to install DDR/SDRAM DIMM Module DDR SDRAM: Single Sided DIMM Double Sided DIMM 1. The DDR DIMM socket has a “ Plastic Safety Tab”, and the DDR DIMM memory module has an Asymmetrical notch”, so the DDR DIMM memory module can only fit into the slot in one direction.
  • Page 25 Mainboard Features SDRAM: 1. The SDRAM DIMM socket has a “ Plastic Safety Tab”, and the SDRAM DIMM memory module has an Asymmetrical notch”, so SDRAM DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the SDRAM DIMM memory modules into the socket at a 90-degree angle, then push down vertically...
  • Page 26: Peripheral Port Features

    JCOM1 6-1. PS/2 Mouse / Keyboard Connector: JKBMS1 The motherboard provides a standard PS/2 mouse / Keyboard mini DIN connector for attaching a PS/2 mouse. You can plug a PS/2 mouse / Keyboard directly into this connector. The connector location and pin definition are shown below:...
  • Page 27: Usb & Lan Port Connectors: Jusblan1

    6-2. USB & LAN Port Connectors: JUSBLAN1 6-2-1. USB Connectors: USB Connector (the below one) USB Connector (the above one) Mainboard Features Assignment +5 V (fused) USBP1- USBP1+ Ground Assignment +5 V (fused) USBP2- USBP2+ Ground...
  • Page 28 6-2-2. LAN Port Connector (Optional) This connector allows you to connect to the Internet through a Local Area Network (LAN). You can set up the connection by entering account information provided by your ISP. LAN Port Connector Mainboard Features Assignment VCC3...
  • Page 29: Serial And Parallel Interface Ports

    6-3. Serial and Parallel Interface Ports This system comes equipped with one serial port and one parallel port. Both types of interface ports will be explained in this chapter. 6-3-1. The Serial Interface: JCOM1 The serial interface port is sometimes referred to as an RS-232 port or an asynchronous communication port.
  • Page 30 6-3-2Video Graphics Adapter Port: JVGA1 This motherboard has built in video facilities. Your monitor will attach directly to JVGA1 connector on the motherboard. Assignment Blue Ground Ground HSYNC DDC/CLK Mainboard Features JVGA1 Assignment Green Ground Ground Ground DDC/Data VSYNC...
  • Page 31 6-3-3. Parallel Interface Port: JPRNT1 Unlike serial ports, parallel standardized and should not present any difficulty interfacing peripherals to your system. Sometimes called centronics port, the parallel port is almost exclusively used with printers. The parallel port on your system has a 25-pin, DB25 connector. The pinout for the parallel port are shown in the table below.
  • Page 32: Game (Joystick/Midi) Port Connector: Jaud_Game

    6-4. Game (Joystick/MIDI) Port Connector: JAUD_GAME This connector allows you to connect a joystick or game pad for playing computer games. Also, you may play or edit professional music by connecting MIDI devices. 6-5. Audio Port Connectors: JSPKR1/JLIN1/JMIC1 Speaker Out 1.
  • Page 33: Audio Subsystem

    Mainboard Features 6-6. Audio Subsystem Socket 478 C PU P4M266 (VT8751) BAT1 Codec VT8235 JCDIN1 ITE I/O...
  • Page 34 6-6-1. CD-ROM Audio-In Header: JCDIN1 Pin No. Left Channel Input Right Channel Input 6-6-2. Front Panel Audio Header: JAUDIO1 Pin No. Assignment Pin No. Mic In Mic Power RT Line Out Reserved LFT Line Out Mainboard Features Assignment Ground Ground Assignment Ground Audio Power...
  • Page 35 Mainboard Features 10/25/2002...

Table of Contents