Biostar M7VIG User Manual page 77

Chapter 3
No color on screen.
PROBABLE CAUSE
Faulty Monitor.
CMOS incorrectly set
up.
C: drive failure.
PROBABLE CAUSE
Hard drive cable not
connected properly.
Cannot boot system after installing second hard drive.
PROBABLE CAUSE
Master/slave jumpers
not set correctly.
Hard drives not
compatible / different
manufacturers.
Trouble Shooting
PROBLEM
DIAGNOSIS
If possible, connect
monitor to another
system. If no color replace
monitor.
Call technical support.
PROBLEM
DIAGNOSIS
Check hard drive cable.
PROBLEM
DIAGNOSIS
Set master/slave jumpers
correctly.
Run SETUP program and
select correct drive types.
Call drive manufacturers
for compatibility with other
drives.
3-5
SOLUTION
SOLUTION
SOLUTION