Biostar M7VIG User Manual page 64

Chapter 2
Suspend Mode
When enabled and when after the set time of system inactivity, all devices except
the CPU will be shut off.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min,
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
The Choices: Suspend→ → → → Off (default), Always on, All Modes→Off.
Video Off Method
This option determines the manner in which the monitor is goes blank.
The Choices:
V/H SYNC+Blank
Blank Screen
DPMS Support
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung."
The Choices: Delay 4 Sec, Instant-Off (default).
10 Min, 20 Min, 30 Min, 40 Min, and 1Hour.
(default)
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
2-25
BIOS Setup