Vcore Ripple Test(Open Up The Dos Editor) - Biostar M7VIB Datasheet

Vcore Ripple Test(Open up the DOS Editor)

CPU
CH 1 STPCLK pin waveform
Condition 1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type "U" to go to the "Utilities Submenu"
3.At the next menu , type "B" to "Enable Stop Clock Throttling"
4.At this menu , type "7" to enable Stop Clock Throttling at the rang of
50.0%~65.0%
5.Press <ESC> twice and then "Y" to exit the stpclk.bat program.
6.Type "EDIT" to enter the "EDIT" program. Press "Alt+F" to open up a
Pop-up menu.
7.Measure the Vcore waveform
67
Athlon 1.4G/100
Vcore Transient waveform
M\B
CH3 Vcore waveform
VIB/1.0
RESULT PASS