Table of Contents
Advertisement
CPU
CH 1
STPCLK pin waveform
Condition
13.
Dos mode and run the stpclk.bat
14.
15.
16.
50.0%~65.0%
17.
18.
71
Vcore Transient Test(Dos Mode)
Duron 1.1G/100
Boot the system to the Win98SE environment(Command Prompt Only)
At the main menu ,type "U" to go to the "Utilities Submenu"
At the next menu , type "B" to "Enable Stop Clock Throttling"
At this menu , type "7" to enable Stop Clock Throttling at the rang of
Press <ESC> twice and then "Y" to exit the stpclk.bat program
Measure the Vcore waveform
Vcore Transient waveform
M\B
CH3
Vcore waveform
VIB/1.0
RESULT PASS
Advertisement
Table of Contents
