Pwron After Pwr-Fail - Biostar M7NCD Pro Bios Setup Manual

M7NCD Pro BIOS Setup
Soft-Off state when the system has "hung."
The Choices: Delay 4 Sec, Instant-Off (default).
WOL (PME#) From Soft-Off
This item allows you to enable or disable the WOL (PME#) From Soft-Off.
The Choices: Disabled (Default), Enabled.
WOR (RI#) From Soft-Off
This item allows you to enable or disable the WOR (RI#) From Soft-Off.
The Choices: Disabled (Default), Enabled.
S3 Resume by USB (Win98)
This item allows you to enable or disable S3 Resume by USB (Win98).
The Choices: Disabled (Default), Enabled.
Power-On by Alarm
This item allows you to enable or disabled power on by alarm.
The Choices: Disabled (Default), Enabled.

PWRON After PWR-Fail

This field determines the action the system will automatically take when power is restored
to a system that had lost power previously without any subsequent manual intervention.
There are 3 sources that provide current to the CMOS area that retains these Power-On
instructions; the motherboard battery (3V), the Power Supply (5VSB), and the Power
Supply (3.3V). While AC is not supplying power, the motherboard uses the motherboard
battery (3V). If AC power is supplied and the Power Supply is not turned on, 5VSB from
the Power Supply is used. When the Power Supply is eventually turned on 3.3V from the
Power Supply will be used.
There are 3 options: "Former-Sts", "On", "Off".
"Former-Sts"
"On"
"Off" (default)
For example: If set to "Former-Sts" and AC power is lost when system is live, then after
AC power is restored, the system will automatically power on. If AC power is lost when
system is not live, system will remain powered off.
Means to maintain the last status of the CMOS when AC
power is lost.
Means always set CMOS to the "On" status when AC
power is lost
Means always set CMOS to the "Off" status when AC
power is lost.
22