Biostar M7NCD Pro Bios Setup Manual page 11

M7NCD Pro BIOS Setup
Cache Setup
CPU Internal Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
The Choices:
Enabled (default)
Disabled
External Cache
This option you to enable or disable "Level 2" secondary cache on the CPU,
which may improve performance.
The Choices:
Enabled (default)
Disabled
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect the IDE
Hard Disk boot sector. If this function is enabled and an attempt is made to write to the
boot sector, BIOS will display a warning message on the screen and sound an alarm beep.
Disabled (default)
Enabled
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test (POST) to
execute after you power up the computer.
Enabled (default)
Disabled
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the keyboard
controller. When enabled, the typematic rate and typematic delay can be configured.
The Choices: Disabled (default), Enabled.
Enable cache.
Disable cache.
Enable cache.
Disable cache.
Virus protection is disabled.
Virus protection is activated.
Enable quick POST.
Normal POST.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
10