8.
Route ice maker wire harness and jumper away from moving
parts and fill tube. Confirm the bail arm can move freely
between the lowered and horizontal positions.
Incorrect harness position (restricting bail arm)
9.
Install air diverter by inserting 2 tabs into openings (A) in
freezer air grille then snapping the clip into slot (B).
10. If your ice maker has an ON / OFF rocker switch, flip the
switch to the OFF (O) position until water connection is
complete.
Turning the ice maker off (rocker switch)
11. If your ice maker does not have a rocker switch, raise wire
A Tabs
B Clip
9
shut off arm to the OFF (up) position until water connection is
complete.
Turning the ice maker off (shut-off arm)