Switching On The Ceramic Hob; Starting A Cooking Zone - Candy PVD 604 Instructions For Use And Maintenance Manual

USING THE CERAMIC HOB
• After powering up the hob, wait 8 seconds to activate the electronic controls.
. Press the button
Electronic control of the hob is activated. In each display zone the heat level
and the control LED blinks.
. After 10 seconds without use, the electronic control goes off and the starting operation
has to be repeated.
• STARTING A COOKING ZONE
. Press the selection button of the required cooking zone. In the display zone, the
control LED is on steady. It shows that the zone is live.
. Press the or
è
Press the button and heat level
level is displayed.
è
Hold down the
The following examples are for information only. Personal experience should
then let you adapt these settings to your taste and habits.
0 : Off
1 : )
2 : ) ..... Melting heat
3 : Keeping hot
4 : Heating up
5 : Thawing, stewing, full cooking, low temperature cooking
6 : Cooking without lid
7 : .rying, meat browning and roasting
8 : High temperature cooking and roasting, seizing
9 : .rying, boiling large quantities of water.......
, for 3 seconds.
button to select a heat level between 1 and 9.
is displayed, press the
or button and the heat level increases or decreases gradually.
is displayed
button and heat
- 57