Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference. The automatic cross-line laser with plumb function and integrated hand-held receiver mode for aligning tiles, wall studding, windows, doors etc. General safety instructions Laser radiation! Caution: Do not look directly into the beam.
Page 3
SuperCross-Laser 2P Laser output windows Laser-emitting window, plumb laser 1/4“ fastening screw 5/8“ tripod threads with threaded bush insert for 1/4“ photo-tripod threads Special pins for direct attachment to a wall ON / OFF switch, transport retainer Laser line selection button...
Page 4
This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment. Further safety and supplementary notices at: www.laserliner.com/info...
Page 5
A2 and A3 is the tolerance. If points A2 and A3 are more than 5 mm / 10 m, the device is in need of calibration. Contact your authorised dealer or else the UMAREX-Laserliner Service Department. Checking the vertical line: Position the device about 5 m from a wall.
Page 6
SuperCross-Laser 2P SERVICE Umarex GmbH & Co KG – Laserliner – Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 laserliner@umarex.de Umarex GmbH & Co KG Donnerfeld 2 59757 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: -333...
Need help?
Do you have a question about the SuperCross-Laser 2P and is the answer not in the manual?
Questions and answers