Communication Ports
The RUGGEDCOM RSG2288 can be equipped with various types of communication
ports to enhance its abilities and performance.
Module Assignment
Figure 4.1
Each type of module has a specific location in the RUGGEDCOM RSG2288 chassis:
•
•
•
The exact configuration of the device can be determined by reading the factory
data file through the RUGGEDCOM RSG2288 user interface. For more information
about how to read the factory data file, refer to the RUGGEDCOM ROS Configuration
Manual for the RUGGEDCOM RSG2288.
Port LEDs
Each communication port is equipped with an LED that indicates the link/activity
state of the port.
RUGGEDCOM RSG2288
Installation Manual, 04/2021, C79000-G8976-1045-17
1
2
Module Assignment
Slot 5 supports a one-port fiber or copper Ethernet module up to 1 Gbps
Slot 6 houses the PTP Source Card
All other ports support any combination of fiber or copper Ethernet connectors
up to 1 Gbps
1
3
5
4
6
LED State
Yellow (Solid)
Yellow (Blinking)
Off
4
Description
Link established
Link activity
No link detected
29