Fastech Ezi-STEP-BT-42 Series Operating Manual page 5

Fastech Co.,Ltd.
◆ ◆ Check the Status of the Ezi-STEP.
Warning
◆ ◆ Install.
Warning
◆ ◆ Connect Cables.
Warning
◆ ◆ Check and Repair.
Attention
4
☞ Do not install a damaged Ezi-STEP or a Ezi-STEP with a missing
part.
Otherwise, the user may get injured.
☞ Carefully move the Ezi-STEP.
Dropping the product on the user' s foot may cause aninjury.
☞ Use non-flammable materials such as metal in the place where
the Ezi-STEP is to be installed.
Otherwise, a fire may occur.
☞ When installing several Ezi-STEP in a sealed place, install a
cooling pan to keep the ambient temperature of the Ezi-STEP 55
℃ ℃ or lower.
Otherwise, a fire or other kinds of accidents may occur due to
overheating.
☞ Before connecting cables, check if input power is off.
Otherwise, an electric shock or a fire may occur.
☞ All parameters of the Ezi-STEP were accordingly set in the
factory. To change these parameters, read the manual carefully
first.
Otherwise, the machine may get damaged.
☞ The case of the Ezi-STEP is insulated from the ground of the
internal circuit by the condenser. Ground the Ezi-STEP.
Otherwise, an electric shock or a fire may occur.
☞ Stop supplying power to the main circuit and wait for a while
before checking or repairing the Ezi-STEP.
Electricity remaining in the capacitor may cause danger.
☞ Do not change cabling while power is being supplied.
Otherwise, the user may get injured or the step drive may get
damaged.
☞ Do not reconstruct the Ezi-STEP.
Otherwise, an electric shock may occur or the user may get injured.