Device Management - Billion BiPAC 7402G User Manual

3G / ADSL2+ (802.11g) (VPN) Firewall Router

Device Management

The Device Management advanced configuration settings allow you to control your router's security
options and device monitoring features.
Device Host Name
Host Name: Give a name for it.
(The Host Name cannot be used with one word only. There are two words should be connected
with a '.' at least.
Example:
Host Name: homegateway ==> Incorrect
Host Name: home.gateway or my.home.gateway ==> Correct)
Embedded Web Server ( 2 Management IP Accounts)
HTTP Port: This is the port number the router's embedded web server (for web-based configuration) will
use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example,
they are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address allowed to logon and access the router's web
server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from
any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user's configuration
session.
For Example: User A changes HTTP port number to 100, specifies their own IP address of 192.168.1.55,
and sets the logout time to be 100 seconds. The router will only allow User A access from the IP
address 192.168.1.55 to logon to the Web GUI by typing: http://192.168.1.254:100 in their web browser.
After 100 seconds, the device will automatically logout User A.
123
Chapter 4: Configuration