Omron E5ZN Series Manual page 8

Operating Procedure Overview
Parameters are divided into groups called levels. Each of the items that is set in any of the levels is called a parameter.
The parameters on the E5ZN are divided into the following seven levels:
Copy
Mode
COPY Key
less than
1 s
COPY Key
1 s min.
Mode/Level
Normal Protect Level
mode
Operation Level
Adjustment Level
Initial Setting Level
Advanced Function Setting Level
Communications Setting Level
Copy mode
❍: Indicates items that can be set.
Note: To move to the Advanced Function Setting Level, set the Initial Setting/Communications Protection parameter in the Protect Level to 0.
Of these levels in normal mode, the Initial Setting Level, Communications Setting Level, and Advanced Function Setting Level can be used only
when operation is stopped. Operation stops when any of these four levels are selected.
It is possible to enter Copy Mode while control is being performed, but copy operations (e.g., upload and download) can be used only when control
has stopped.
Power ON
Operation Level
Key less
than 1 s
Key Key
1 s min. 3 s min.
Initial Setting Level
Key less
than 1 s
Password input
Key
set value "−169"
1 s min.
Advanced Function Setting Level
During
operation
❍
❍
❍
---
---
---
---
Adjustment Level
and M
Keys 1 s min.
Flashes for Key
1 s or longer.
Control stops.
Communications
Setting Level
During operation
Operation stopped
Operation
stopped
---
---
---
❍
❍
❍
❍
Normal Mode
and M
Keys 3 s min.
Protect Level
8