Reversing The Door; Freezer Defrosting - Proline TTZ 96 P Operating Instructions Manual

EN
Reversing the door
Freezer defrosting
Frost will accumulate inside the freezer depending upon the length of time during which the door is left
open or the amount of moisture introduced.
It is essential to ensure that no frost or ice is allowed to form at places where it will affect the close
fitting of the door seal.
This might allow air to penetrate the cabinet, thus encouraging continuous running of the compressor.
Thin frost formation is quite soft and can be removed with a brush or plastic scraper. Do not use metal or
sharp scrapers, mechanical devices or other means to accelerate the defrosting process. Remove all
dislodged frost from the cabinet floor.
8