The Front Leds - Billion BiPAC 7402NX User Manual
802.11n 3g/adsl2+ (vpn) firewall router
Hide thumbs
Also See for BiPAC 7402NX:
- User manual (165 pages) ,
- Quick start manual (8 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
The Front LEDs
LED
1
Power
LAN Port
2
1X — 4X
(RJ-45 connector)
3
USB
4
Wireless
5
DSL
6
Internet
Chapter 2: Installing the router
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
1
2
Lit when power turns ON. Lit in red means the system is failed. To
restart the device or connect Billion for searching support.
Lit when one of LAN ports connected to an Ethernet device.
If the speed of transmission hits 1000Mbps light will appear
Green; If the speed of transmission hits 100Mbps light will appear
Orange. If the speed of transmission hits 10Mbps, light will not
shine.
Blinking when data is Transmitted / Received.
Lit when the device connected to a USB device.
Flash when the device is sending/receiving data.
Lit green when the wireless connection is established.
Flashes when the device is sending/receiving data.
Lit Green when the device is successfully connected to an ADSL
DSLAM.("line synch").
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
3
4
5
Meaning
6
7
Advertisement
Table of Contents
