Table of Contents
Advertisement
Storage conditions
Storage up to 3 months
Storage longer than 3
months
For storage of the accumulator shut-off block, the following storage conditions must be
complied with:
Table 7: Storage conditions
Denomination
Temperature range
Relative air humidity (no condensation)
UV protection
Condensation
Additional ozone formation near the storage location.
No special preservation necessary.
Contact Bosch Rexroth for the preservation and later commissioning of the
accumulator shut-off block if the accumulator shut-off block must be stored for a
period of more than three months.
6.4 Painting the accumulator shut-off block
Restriction of functionality or overheating of the accumulator shut-off block due
to coating!
Damage to property!
▶
Close the hydraulic connections completely before the paint application.
▶
Protect the surface of the solenoid coils as well as fixing holes and surfaces
from paint application.
▶
Cover the name plate of the accumulator shut-off block as well as the name
plates of the valves in such a way that they remain readable after painting.
▶
Cover the connectors of the electrical connections with protective foil and make
sure not to cause any damage to the connector.
▶
When removing the paint protection and the covers make sure that no paint
chips or other foreign particles enter the accumulator shut-off block.
RE 50129-B/02.19, Accumulator shut-off block type ABZSS, 0532VAW, Bosch Rexroth AG
Transport and storage
NOTICE
39/64
Area
10-25 °C
max. 65%
100%
none
none
Advertisement
Table of Contents
