Installation - GoodHome Bamia GHPY71 Manual

EN Safety
PL Bezpieczeństwo
EN

Installation

All installation must be carried out by a
competent person or qualified electrician.
Before connecting the mains supply ensure that
the mains voltage corresponds to the voltage on
the rating plate.
Direct Connection
• The appliance must be connected directly to
the mains using an omnipolar circuit breaker
with a minimum opening of 3 mm between
the contacts.
• The installer must ensure that the correct
electrical connection has been made and that
it complies with the wiring diagram.
• The cable must not be bent or compressed.
• Regularly check the power cord for damage.
If the supply cord becomes damaged, it must
be replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
• WARNING: This is a Class I appliance and
MUST be earthed.
• The appliance is supplied with a 3-core mains
cable and must be connected to the electricity
supply via a double pole switch having a 3 mm
minimum contact gap on each connector.
• The Residual Current Device (RCD) must be
rated at 16 Amps.
The wires in the mains lead are coloured in
accordance with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow =
EUR
N N
L L
(Blue)
N
L (Brown)
(Green/Yellow)
To avoid the risks that are always present when
you use an electrical appliance it is important
that this appliance is installed correctly and
that you read the safety instructions carefully
to avoid misuse and hazards. Please keep this
FR Sécurité
RO Siguranță
- Earth
UK
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
FUSE ON
USE A 16AMP FUSE
instruction booklet for future reference and pass
it on to any future owners. After unpacking the
appliance please check that it is not damaged.
If in doubt, do not use the appliance but contact
Customer Services - see end of Care &
Maintenance section for details.
04