Connect The Gateway - Nokia AD-42W Manual

Wireless audio gateway
Hide thumbs Also See for AD-42W:
Table of Contents

Advertisement

Available languages

Available languages

C o n n e c t t h e g a t e w a y

7. Connect the gateway

Ensure that the home stereo system is switched off before making any
connections to it.
To play music on your paired music player through a home stereo system,
plug the supplied RCA cables to the audio outputs on the gateway and to
the audio inputs on your stereo system.
To play music on your home stereo system through a paired headset,
plug the RCA cables to the audio inputs on the gateway and to the audio
outputs on your stereo system.
After you have connected the gateway to your home stereo system, set
the volume at a moderate level on the music player or headset and the
stereo system, and start to play music on the music player or stereo
system.
If you have paired and connected the gateway with a music player and
a headset, to switch between the two connections, press the operating
mode key. To use the gateway with a music player, the operating mode
key must be in the down position. To use the gateway with a headset,
the operating mode key must be in the up position.
11

Advertisement

Table of Contents
loading

Table of Contents