Technical Data - Okoia UB10 Operating Instructions Manual

Drying
Hang the underblanket to air dry naturally in a horizontal position until completely dry.
Do not expose to direct sunlight.
Do not dry with a hair dryer or heater.
Maintenance
Examine the underblanket regularly to check that there are no signs of wear or
damage. If any damage/wear is spotted, do not use the underblanket and seek
specialist advice. If the mains lead or controller is damaged, do not open or attempt to
repair them as they must be serviced by a qualified person.
Storage
When not in use, allow to cool and dry then fold neatly but not tightly (or roll) in the
original packaging without sharp bends in the heating element.
Store where no other objects will be placed upon it in a cool dry place.

TECHNICAL DATA

Power supply: 220-240V~ 50Hz
Rated power: 60W for UB10,
2 x 60W for UB20
We apologise for any inconvenience caused by minor inconsistencies in these
instructions, which may occur as a result of product improvement and development.
Kesa Electricals © UK: EC1N 6TE 16 / 08 / 2013
EG-8