Table of Contents
Advertisement
Quick Links
ECX - 1U/2U
INSTALLATION GUIDE
ES: Visite nuestra pagina web
www.belden.com para
FR: Veuillez visiter notre site web au
1U
TABLE OF CONTENTS
ECX-1U/2U INSTALLATION GUIDE
obtener el guía de instalación en español.
www.belden.com
pour obtenir le guide d'installation en français.
2U
PX106483-EN REV A
3
4
4
5
5
5
6
6-8
9
9
9
10
10
11
11
12
12
13
13
13
14
14
14
14-15
15
16
Page 1 of 22
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Belden ECX-1U
Summary of Contents for Belden ECX-1U
-
Page 1: Table Of Contents
7.1. Securing a distribution cable onto the internal strain relief 7.2. Installing distribution cable for field termination A. Standard recommended procedure 14-15 B. Distribution cable attachement on the rear door (optional) C. Break-out kit cable routing (optional) ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 1 of 22... - Page 2 8. Installing distribution cable for ECX splice cassette 8.1. Standard recommended procedure 8.2. Optional recommended procedures A. Distribution cable attachement on the angled external strain relief B. Field termination with ECX accessories: splice cassette and frame 9. Proposed front patch cord management 9.1.
-
Page 3: Precautions
CAUTION: Avoid contact between broken glass fibers. These glass fiber fragments are sharp and can penetrate the skin easily. The use of safety gloves is highly recommended. CAUTION: Maintain a clean work area by sweeping all the fiber debris and disposing of them appropriately. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 3 of 22... -
Page 4: Carton Contents
2. Carton contents 1. Removable top covers (2x) 5. Sliding tray 8. I nstallation guide [ECX: Splice 2 . Rear door 6. Patch cord management clips cassette and 1U/2U QSG - not shown] 3. Housing 9. Hardware kit [not shown] (3x for ECX 1U and 6x for ECX 2U) 4. -
Page 5: Fx Ecx Accessories And Tools Required
• FX ECX intermediate internal strain relief (2x) (ECX-LBL-2U) (ECX-INTERSTR) section 10.2. NOTE: Refer to to see detailed illustrations of I.D. labels. 3.2. Tools required • Phillips screwdriver • Cutting pliers ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 5 of 22... -
Page 6: Mounting The Ecx Housing
4. Mounting the ECX housing This section shows how to install the ECX 1U/2U to a 19" rack or cabinet. 1. Insert the bottom screws into the rack as shown (use #12-24 or #10-32 screws provided in the hardware kit). 2. - Page 7 2. Identify the mounting hole location where the brackets will be installed. Without brackets: Standard position: 3” position: Flush position: = Mouting brackets installation areas. 3. Install the bracket by reusing the same screws. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 7 of 22...
- Page 8 4. Mount the housing to the rack. Standard mounting postion: 3” mounting positon overview Flush mounting position overview ECX 1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 8 of 22...
-
Page 9: Housing Features And Manipulation
A. Front door 1. To open the door, press both latches downwards simultaneously. 2. To remove the door, press the bottom tab and slide the door to the left as shown. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 9 of 22... -
Page 10: Rear Door
B. Rear door NOTE: The rear door opens identically to the front. To remove the rear door, bend the metal tab downwards and slide the door to the left. 6.2. Removal of the top covers Remove the front or rear cover by pressing the side latches simultaneously. NOTE: When the brackets are in the flush position, the front cover latches are inaccessible. -
Page 11: Removal Of The Sliding Tray
NOTE: The sliding tray can also be removed from the rear as shown. 6.4. Installation and removal of ECX frames 1 Insert the desired frame as shown. 2 To remove the installed frame, press on both tabs simultaneously. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 11 of 22... -
Page 12: Removal Of The Cassette Guide
6.5. Removal of the cassette guide Remove the cassette guide by pulling the latch upwards and sliding the guide backwards. 6.6. Installation of cable routing components Align the intermediate strain relief and management clips with their respective holes and secure the parts by turning them 90º. NOTE: The intermediate strain relief can also be stacked on the ECX 2U. -
Page 13: Installation Of The External Strain Relief
1 Align the internal strain relief tab with its respective hole and secure it by tightening the captive screw. 6.9. Removal of the patch cord management clips (optional) 1 (If needed) release the patch cord management clips by lifting them upwards. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 13 of 22... -
Page 14: Cable Routing
7. Cable routing 7.1. Securing a distribution cable to the internal strain relief See below options for securing distribution cables. Smaller diameter cables Medium (or multiple) diameter cables Larger diameter cables 7.2 Installing distribution cable for field termination This section explains and shows different cable routing methods for the ECX 1U/2U. A. -
Page 15: Distribution Cable Attachement On The Rear Door (Optional)
1 Use the cable tie (7”) to secure the sub-unit cables together and the distribution cable to the rear door. Follow the step 2 to 5 ofsection 7.2. to complete the fiber routing. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 15 of 22... -
Page 16: Break-Out Kit Cable Routing (Optional)
IMPORTANT: This installation guide does not include how to install the fiber cables into the break-out kit components. For further information, please refer to the break-out kit installation guide or visit our website at www.belden.com. 1 Loop and secure the distribution cable to the internal strain relief. -
Page 17: Installing Distribution Cable For Ecx Splice Cassette
When attaching the distribution cable, do not over-tighten the cable tie. 63" (1.60m) 17.5" (0.45m) approx. Rear tab Front tab ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 17 of 22... -
Page 18: Optional Recommended Procedures
8.2 Optional recommended procedures A. Distribution cable attachement on the angled external strain relief This method has the same installation steps as mentionned in section 8.1. B. Field termination with ECX accessories: splice casettes and frames (optional) 1 Prepare cables by following the illustrated image as shown below. 2 Install the cassette and route the fiber cables. -
Page 19: Proposed Front Patch Cord Management
9. Proposed front patch cord management NOTE: For both options presented below; the tray is pulled forward for clarity. 9.1. Fiber patch cord management 9.2. Copper connectivity ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 19 of 22... -
Page 20: Ecx Labeling
10. ECX labeling This section shows how to apply the provided I.D. labels onto the label card and how to access it within the housing. 10.1. I.D. label card access, position and removal 1 To access the label card, pull out the card and tilt it upwards. 2 (If needed) remove the card by pushing downwards. -
Page 21: Securing The Ecx 1U/2U (Optional)
NOTE: This accessory can be installed on the front and rear doors. 1 Open the rear or front door and remove the cap by pinching the rear tabs as shown. ECX-1U/2U INSTALLATION GUIDE PX106483-EN REV A Page 21 of 22... - Page 22 2 Install the lock in its respective location. Secure the lock by tightening the flat nut as shown. 3 Remove the screw that is installed in the lock. Insert and secure the clamp by tightening the screw. 4 Once the lock kit is installed, close door and secure it with the provided key. (section 11.1) NOTE: When the lock-kit is installed, the top covers must always been secured.
Need help?
Do you have a question about the ECX-1U and is the answer not in the manual?
Questions and answers