Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Belden PPC FlexPon
Summary of Contents for Belden PPC FlexPon
- Page 1 FlexPon Demarcation Enclosure Installation...
- Page 2 FlexPon Demarcation Enclosure Installation STEP 1 STEP 2 Once mounted, open the enclosure and cut the right Pull the end of the drop cable into the fiber input port side stepped grommet to fit over the end of the fiber drop and secure with the band clamp - and strength member cable or microduct.
- Page 3 FlexPon Demarcation Enclosure Installation STEP 5 STEP 6 Cut the left side stepped grommet to fit over the Clamp the microduct into the fiber payout port and end of the fiber payout cable or microduct. position the grommet so it seals the fiber payout port.
- Page 4 FlexPon Demarcation Enclosure Installation STEP 9 STEP 10 Plug the connector into the top of the SC coupler Lift up on the lid and swing the door shut. and push both sides of the payout fiber underneath the left side retention member. STEP 11 Secure the door closed using a can wrench.
- Page 5 For more than 70 years, PPC has HEADQUARTERS been developing and manufacturing Syracuse, New York connectivity solutions for broadband service providers. Holding more 6176 East Molloy Road patents in connector technology than East Syracuse, New York 13057 any other company worldwide, PPC continues to be a premier driver of TEL: 315-431-7200 FAX: 315-431-7201...
Need help?
Do you have a question about the PPC FlexPon and is the answer not in the manual?
Questions and answers