Autel MaxiTPMS TBE200 User Manual
  1. Manuals
  2. Brands
  3. Autel Manuals
  4. Measuring Instruments
  5. MaxiTPMS TBE200
  6. User manual
Autel MaxiTPMS TBE200 User Manual

Autel MaxiTPMS TBE200 User Manual

Hide thumbs Also See for MaxiTPMS TBE200:
Table of Contents

Advertisement

Quick Links

Trademarks
®
®
Autel
, MaxiSys
®
MaxiCheck
are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States, and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of
Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications, and illustrations in this manual are based on the
latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct, special, incidental, nor indirect damages,
nor any economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
www.maxitpms.com
®
, MaxiDAS
, MaxiScan
®
®
, MaxiTPMS
, MaxiRecorder
i
®
, and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MaxiTPMS TBE200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autel MaxiTPMS TBE200

Summary of Contents for Autel MaxiTPMS TBE200

  • Page 1 All information, specifications, and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no...
  • Page 2 1-855-288-3587/1-855-AUTELUS (North America) supporttpms@auteltech.com For technical assistance in all other markets, please contact your local distributor.

  • Page 3: Safety Messages

    Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.

  • Page 4: Safety Instructions

    Safety Instructions The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you of all possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
  • Page 5 Any distraction may cause an accident.  Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment. ...

  • Page 6: Table Of Contents

    CONTENTS ..................AFETY NFORMATION ..................AFETY ESSAGES ..................AFETY NSTRUCTIONS 1 USING THIS MANUAL ..................8 ....................8 ONVENTIONS 2 GENERAL INTRODUCTION ................. 10 TPMS TBE200 E ..............10 XAMINER ..................15 THER CCESSORIES 3 GETTING STARTED ..................16 3.1 P .....................
  • Page 7 ......................33 LEEP ................. 33 UTOMATIC HUTDOWN ................. 34 ANGUAGE AND REGION ......................34 BOUT ......................34 PDATE ................ 34 ESTORE ACTORY ETTINGS 11 MAINTENANCE AND SERVICE ..............35 ................. 35 AINTENANCE NSTRUCTIONS ..............36 ROUBLESHOOTING HECKLIST 12 SERVICE PROCEDURES ................37 13 COMPLIANCE INFORMATION ..............

  • Page 8: Using This Manual

    Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Contact your sales representative for availability of other modules and optional tools or accessories.
  • Page 9 IMPORTANT Keep the cable away from heat, oil, sharp edges, and moving parts. Replace damaged cables immediately. Hyperlink Hyperlinks or links that take you to other related articles, procedures, and illustrations are active in electronic documents. Blue italic text indicates a selectable hyperlink and blue underlined text indicates a website link or an email address link.

  • Page 10: General Introduction

    General Introduction The Autel MaxiTPMS TBE200 Examiner (hereinafter referred to as “the tool”) is a laser-enabled tire & brake disc-wear examination tool that provides users with quick and accurate tire-wear measurements along with the ability to measure brake disc wear without having to remove tires. The tool's dual cameras enable users to document tire wear and damage as well as scan Tire Identification Numbers (TINs).
  • Page 11 Figure 2-2 Examiner Front View Power/Measure button — Press and hold this button for 3 seconds to power the tool on and off; once on, press the button quickly to take measurements. 1.65-inch AMOLED Screen Figure 2-3 Examiner Side View...
  • Page 12 Magnetic Head Figure 2-4 Examiner Back View Camera Flash 8-megapixel Camera Laser Diode 1-megapixel Camera Power Sources The tool can receive power from any of the following sources:  Internal Battery Pack  AC/DC Power Supply Internal Battery Pack The tool can be powered by its internal rechargeable battery, which when fully charged can provide sufficient power for about 8 hours of continuous operation.
  • Page 13 The tablet can be powered from a wall socket using its AC/DC power supply. The AC/DC power supply also charges the tool’s internal battery. Technical Specifications Table 0-1 Specifications Item Description Product Tire & Brake Disc Examiner Name Class 3R Laser Product Laser Classification IEC 60825-1:2014...
  • Page 14 Item Description Labelling Processor 4x ARM Cortex-A35 (1.5 GHz) Memory 1GB RAM LPDDR3 & 4GB On-board Memory 1.65-inch AMOLED capacitive touchscreen with 348x442 Display pixel resolution  Wi-Fi  USB 2.0, Type C Connectivity Micro- CMOS WXGA, 1 megapixel & 8 megapixel, 30 fps cameras Audio Output Output: beep...

  • Page 15: Other Accessories

    Item Description  3.7 V/3000 mAh 18650 lithium-ion battery Power &  Charges via 5 V AC/DC power supply Battery Tested Around 8 hours of continuous use Battery Life Battery Charging 5 V/1.5 A Input Power 300 mA (AMOLED on with default brightness) @3.7 V Consumption Operating −10 to 45°...

  • Page 16: Getting Started

    Figure 3-1 TBE200 Job Menu  ① System Status Icons  ② Application Buttons  ③ Locator 3.1.1 System Status Icons As the MaxiTPMS TBE200 runs on the Android operating system, you may refer to Android documents for additional information.
  • Page 17 3.1.2 Application Buttons The table below briefly describes each of the applications on the TBE200. Table 3-1 Application Buttons Description Button Name Accesses the tool’s tire-tread check function. See Tire Tread Tire Tread Check on page 18 for details. Launches the brake disc wear measurement Brake Disc function.
  • Page 18 3.1.3 Locator The Locator icon displays at the bottom of the TBE200 Jobs screen. Swipe the screen left or right to view the previous or next screen.

  • Page 19: Tire Tread Check

    Tire Tread Check Using laser technology, the Tire Tread application analyzes the wear of the tires on vehicles with no need to remove the tires. Place the tool on the tire, the tool projects a laser beam and the image will be captured by a 4cm macro- lens camera.

  • Page 20: Check Modes

    Icon Results Description The tire is unchecked. Unchecked (Gray) Please check regularly. Normal (Green) Warning: wear level is Recommend replacing. approaching (Yellow) critical value. Replace immediately. Danger: Severe tire wear. (Red) 4.1 Check modes There are two check modes available under the Tire Tread application: Single Check The Single Tire check measures the wear of each tire on the vehicle by examining the tread depth in the center area of the tire only.

  • Page 21: Details

    Tread check, the Single Tire check only provides one measurement for each tire. All Tread Check The All Tread check examines your tire wear in three separate areas (outer, center, and inner) for a more comprehensive analysis.  To perform a Tire Tread Check Tap the Tire Tread application icon on the Main Job Menu.
  • Page 22 The following three tire-related sections are provided in all check modes except for Brake Disc: Tire Condition — displays tire status, including normal, worn, bulge, etc. Tire DOT — scan or manually enter the tire DOT serial number located on the sidewall to acquire basic tire characteristics such as tire age.

  • Page 23: Brake Disc Check

    Brake Disc Check Your MaxiTPMS TBE200 laser-enabled tool examines brake disc wear quickly and accurately. You can examine the wear status of a brake disc without the need to remove tires. Measurements displayed graphically. The Brake Disc function not only provides brake disc wear measurements, but also offers analysis to ensure driving safety.

  • Page 24: Check Mode

    Icon Results Replacement recommended (Yellow) Replace immediately (Red) 5.1 Check mode Brake Disc Check The Brake Disc function checks for brake disc wear and provides wear analysis. This check mode focuses on brake disc measurements only.  To perform a Brake Disc Check Tap the Brake Disc application icon on the Main Job Menu.
  • Page 25 Graphic measurements — displays the measurements data graphically with by color to indicate disc wear conditions. Wear analysis — displays service recommendations for disc replacement. Figure 5-2 Details Screen...

  • Page 26: Quick Check

    Quick Check The Quick Check function is specifically designed to measure the tires and brake discs in one session. This mode also provides a comprehensive analysis of tire and brake disc wear. Figure 6-1 Quick Check Screen Degree of wear status is illustrated by the colors below below: Tire Tread Icon Brake Results...

  • Page 27: Check Mode

    (Green) Warning: significant Replacement (Yellow) wear recommended. detected. Danger: severe Replace (Red) wear immediately. detected. 6.1Check mode Quick Check The Quick Check function combines the measuring of the tread depth and brake disc wear.  To perform a Quick Check Tap the Quick Check application icon on the Main Job Menu.

  • Page 28: Details

    6.2 Details The Details screen displays additional information related to tire and brake disc wear measurements. After measurements display on the screen, select a wheel or disc location, and swipe left to view details of the chosen tire or disc. Below are the main tire-related sections featured in the Details section: Graphic Measurements —...

  • Page 29: Check Settings

    Check Settings Tap the Check Settings application icon on the Main Job screen, a list of options will display. Adjust these tire-related settings to your preference for optimal All Tread check and Single Check results. Number of tires The default tire number is four. If the vehicle has three axels, make sure to adjust the Number of tires to six before measuring tire tread depth.

  • Page 30: Tread Check Mode

    Tread Check Mode This option allows you to choose between Single Check and All Tread Check before initiating a tread check measurement. After choosing the check mode, a check mark will display to the right of the active selection. Brake Disc Wear Limit This option enables you to adjust the brake disc wear limit for brake disc checks.

  • Page 31: Data Query

    Data Query The Data Query function stores the results of the latest measurement session. After the tool is connected with the ITS600 tablet, the measurements of the previous session will display on the tablet screen automatically. Once a new measuring session starts, the previous test results will be replaced by new results.

  • Page 32: System Calibration

    System Calibration The System Calibration application is used to calibrate your examination tool for optimal measuring results. On the Main Job screen, tap the Calibration icon and place the magnetic head on the calibration table. Press the Power/Measure button to start. Wait for 1–2 minutes until calibration is complete.

  • Page 33: Settings

    Settings Access the Settings menu to adjust default settings and view information about the TBE200. The Settings menu includes the following: Network connection This option is for connecting the tool to the Internet. There are two network types available: Wi-Fi and Wi-Fi Direct. Simply swipe the toggle to turn it on. NOTE Ensure you turn on both the Wi-Fi and Wi-Fi Direct toggles when pairing the tool with the ITS600 tablet for comprehensive inspection reports.

  • Page 34: Language And Region

    Language and region This option allows you to adjust the region for the TBE200. There are 19 regions available. Select the region where you will be using the device. A check mark will display to the right of the selected region. About The About function provides information about the tool, including the model name, serial number, password, and firmware version.

  • Page 35: Maintenance And Service

    Maintenance and Service To ensure that the examination tool performs at its optimum level, we advise that the product maintenance instructions in this section are strictly followed. Maintenance Instructions The following shows how to maintain your tool, together with precautions you should take: ...

  • Page 36: Troubleshooting Checklist

    You may be attempting to use the tool in an overly hot/cold environment. Charge the tool in moderate temperatures.  Your tool may have not been connected to the charger properly. Check the connector. NOTE If the problems persist, please contact Autel's technical support personnel or your local selling agent.

  • Page 37: Service Procedures

    This section introduces information for technical support, repair service, and application for replacement or optional parts. Technical Support If you have any question or problem on product operations, please contact us. AUTEL NORTH AMERICA  Phone:1-855-AUTEL-US (855-288-3587) Monday-Friday 9am–6pm  Website: www.autel.com  Email: sales@autel.com;...
  • Page 38 Phone: +045 5948465  Email: sales.jp@autel.com; support.jp@autel.com  Address: 719, Nissou Building, 3-7-18, Shinyokohama, Kouhoku, Yokohama, Kanagawa, Japan 222-0033  Website: www.autel.com/jp/ AUTEL IMEA DMCC  Website: www.autel.com  Phone: +971 585 002709  Email: sales.imea@autel.com; imea-support@autel.com  Address: Office 1006-1010, Cluster C, Fortune Tower, Jumeirah Lakes Tower (JLT), Dubai, U.A.E...
  • Page 39 8th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China Other Services You can purchase optional accessories directly from Autel authorized tool suppliers, and/or your local distributor or sales agent. Your purchase order should include the following information: ...

  • Page 40: Compliance Information

    Compliance Information FCC Compliance FCC ID: WQ8TBE200 This device complies with Part 15 of the FCC rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
  • Page 41 – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • Page 42 CE COMPLIANCE This product is declared to conform to the essential requirements of the following Directives and carries the CE mark accordingly: EMC Directive 2014/30/EU R&TTE Directive 1999/5/EC Low Voltage Directive 2014/35/EU...

  • Page 43: Warranty

    Warranty Limited One Year Warranty Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser of this MaxiTPMS Tire & Brake Disc Examiner that should this product or any part thereof during normal usage and under normal...
  • Page 44 IMPORTANT All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before delivering the product for warranty service.

Table of Contents