LAVAZZA firma INOVY MINI Instructions Manual page 23

Press the ESPRESSO button to start delivery. The
machine will stop delivery automatically when the pro-
grammed measure is reached (30 ml).
The switch-on/supply button will light up to a blink-
ing white light when the product is being supplied.
If power supply is interrupted during the coffee
supply cycle, restore power supply and restart the
coffee supply procedure.
If during the supply cycle, water lacks in the tank,
water lack will be indicated by white steady LED on
the selected button, while the LED on the other but-
ton will start flashing, then proceed as follows:
- Fill the water tank up to the MAX level indicated.
- Press the power-on/supply button previously se-
lected. The button will start flashing and the cof-
fee supply procedure will restart.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
PREPARING THE COFFEE
FREE DOSE BEVERAGE DELIVERY
Do steps: , , and
DELIVERY
PRESSO
Press the FREE DOSE BEVERAGE button to
start delivery. Once the desired amount of brewed
coffee is reached, press the button again to stop
brewing.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
After 8 supplies the switch-on/supply buttons
start blinking fast with white light to indicate that
the capsules drawer is filled. Empty the capsules
drawer and press one of the buttons to reset the
machine. Now the machine is ready for a new
supply.
In case of soluble pods, it is recommended that a
brief plain (i.e. by using only water) supply should
be dispensed before inserting the pod, so that you
can best enjoy the product.
EN
in paragraph ES-
.
23