Table of Contents
Advertisement
Available languages
Available languages
FP48951MEE-Rev1
26/4/06
4:13 pm
Page 4
www.morphyrichards.com
4
Features
⁄ Small food pusher
¤ Large food pusher
‹ Fruit shoot
⁄
› Juice cover
fi Mesh filter basket
fl Juice collector
‡ Juice outlet spout
· Motor base unit
‚ On/off/speed selector switch
„ Locking arm
‰ Cord storage
 Pulp collection container
Ê Juice container
Á Removable froth guard
¤
‹
›
fi
fl
‡
Á
·
‚
„
‰
Â
Ê
Before use
the peel, remove it first. Remember
WARNING: Never immerse the
what you put into the Juicer, you
base unit in water.
will get out as juice.
•
Citrus (eg. oranges, lemons)
•
Carefully unpack your juice
and thick fruit peel (eg.
extractor.
pineapple) must be removed
•
Lower the locking arm to remove
first.
the washable parts.
•
Stones or large pips will have to
•
Wash all parts except from the
be removed before juicing. Pips
motor unit in hot soapy water. Rinse
from apples and oranges are
well and dry thoroughly. (see
acceptable, anything larger or
Cleaning page 6).
harder will need to be removed.
•
All parts must be dry before
•
Cut into suitable size pieces to fit
mounting on the base unit.
into the fruit shoot. Usually apples
•
Wipe the base with a soft, clean
need only to be cut in half.
cloth to remove small particles that
4
Switch to the appropriate speed, as
may have collected during packing
indicated in the Speed Selector
and handling.
table.
5
If juicing larger pieces, use the large
Assembly
food pusher (with the small pusher
locked in place) apply gentle force,
1
Place juice collector on top of the
to press the fruit down E.
motor base aligning the spout with
the corresponding cut out in the
For juicing small pieces ie grapes,
base A.
or carrots, unlock the small pusher
2
Place the mesh filter basket inside,
(by rotating), place the large pusher
pushing down to make sure it clicks
in the fruit shoot, and feed the
firmly into place B.
fruit/vegetables through the hole in
3
Place the juicer cover on top
the large pusher, apply gentle force
ensuring that the juice cover spout
to press the fruit down F.
and outlet for the juice collector are
aligned.
Using the correct size pusher for the
4
Lift the locking arm up and lock into
size of pieces being juiced is
place on top of the juicer cover C.
essential to prevent splashing and
efficient juice yield.
NOTE: The juice extractor will
not work if the locking arm is
6
With the motor running place food
not correctly in place C.
into the fruit shoot.
WARNING: Always use the food
IMPORTANT: Do not pick up the
pusher to push fruit into the
juice extractor using the locking
feed tube.
arm.
Never use utensils or your
5
Tilt the pulp container slightly to fit
fingers to push fruit down the
under the juice cover D.
feed tube. Ensure you use the
6
Put the juice container under the
food pusher at all times.
spout ensuring the froth guard is
fitted correctly.
Never use the small food
7
Place the large food pushers into
pusher without the large pusher
the food shoot and the small food
inserted into the fruit shoot.
pusher can be locked into place by
rotating.
IMPORTANT
JUICING
•
The large fibrous pulp produced is
1
Plug the juicer into the electrical
thrown into the pulp collector, the
socket.
finer pulp can rest on the inner
2
Ensure that both the juice container,
surface of the mesh filter basket.
pulp container and frothguard are in
With prolonged use this can reduce
place.
the efficiency of the juice extraction
3
Most fruit and vegetables can be
and cause a blockage.
put into the Juice Extractor with the
•
When extracting large quantities of
peel in place. Ensure the fruit or
juice, it is advised to rinse out and
vegetables are throughly washed, to
clean the mesh filter basket during
remove any dirt or chemicals, if you
this process. This will prevent
are concerned with the quality of
blockages and possible leakage of
www.morphyrichards.com
A
B
C
g
D
E
F
5
Advertisement
Table of Contents
