Before First Use; Using Your Milk Frother - Morphy Richards Accents Instructions For Future Use

CM210002 MUK Rev3.qxp_Layout 1 23/03/2017 15:54 Page 4

Before First Use

Remove all packaging and wash the inside of your milk frother using warm soapy water and a soft
damp cloth. DO NOT use a scouring pad or abrasive material as this will remove the non-stick
coating. DO NOT immerse the frother in water. Rinse and dry thoroughly before use.

Using Your Milk Frother

Place the milk frother on to a dry, level
surface. Remove the Lid
upwards.
Place the Stirring Arm
(5). Use the Magnet on the inner side
to locate the Stirring Arm.
4
1
(1) by lifting
3
(13) into the Jug
(11)
If frothing is required, ensure the Frothing
Whisk (14) is securely attached to the
Stirring Arm (13).
If only stirring is required, ensure the
Frothing Whisk is removed.
When not in use, the Frothing Whisk can be
pushed onto the Frothing Whisk Storage
on the underside of the Lid (1).
Pour milk into the Jug (5). When using the
Frothing Whisk (14), do not exceed the
Max Level (Frothing) (10) on the inside of
the Jug.
Replace the Lid (1) and select your
preferred frothing programme, see details
on page 5.
2
(2)
4