Table of Contents
Advertisement
To reset a particular parameter of a particular color temperature:
Select the parameter as selected in step 2 above, then press
the reset button.
The selected parameter is reset.
Screen OSD
Press the Screen button to display the Screen OSD, then
complete the following:
1. Press the Brightness −/+ buttons to select a parameter.
2. Press the Contrast −/+ buttons to adjust the parameter:
H Convergence/V Convergence: Adjusts horizontal
and vertical convergence.
V Conv Top/V Conv Bot: Adjusts the vertical
convergence at the top and bottom of the screen.
H Focus: Adjusts the horizontal focusing.
Cancel Moiré: Cancels Moiré when "ON" is selected.
Moiré Adj: Reduces picture fuzziness caused by
canceling Moiré. Beginning at 0, adjust until the moiré
is at a minimum.
Landing: Improves color uniformity and lightens the
darkness in the corner of the screen.
Degauss: Corrects color impurities due to the influence
of the earth's magnetism.
English 1-17
Advertisement
Table of Contents
