Table of Contents
Advertisement
Contrast
Using Expert Mode
Adjusting Color Temperature
1-16 English
Press the Contrast button, then complete the following:
Press Contrast button ← to decrease the contrast.
Press Contrast button → to increase the contrast.
To turn off the OSD, wait 3 seconds for it to automatically
disappear.
Expert mode allows adjustments to be made to the OSD in
greater detail. To select Expert mode:
Press the Option button to display the Option OSD.
Press the Brightness −/+ buttons to select the OSD menu.
Press the Contrast −/+ buttons and select Expert.
To turn off the OSD, press the Option button again.
Press the Color button to display the Color OSD.
Press the Contrast −/+ buttons to select the color
temperature to adjust.
Press the Brightness −/+ buttons to select Variable.
Press the Contrast −/+ buttons to adjust the color
temperature.
R Bias/G Bias/B Bias adjust the black level of each
signal.
R Gain/G Gain/B Gain adjust the white level of each
signal.
The symbol "++" will appear to the right of the adjusted color
temperature. The OSD automatically disappears after 30
seconds, or turn it off by pressing the Color OSD button
again.
To reset all parameters of a particular color temperature:
Select the color temperature as in step 1 on the previous
page, and press the reset button.
The "++" appearing to the right of the adjusted color
temperature disappears, and the parameters are reset.
Advertisement
Table of Contents
