Compaq P1610 User Manual page 10

Front Control Panel
Icon
7
8
9
:
;
<
Computer Select Signal
This monitor has two signal connectors on the rear panel which
make it capable of connecting two computers to the monitor at
the same time. When two computers are connected to the
monitor and both are turned on, select the computer signal you
want to use by doing the following:
On the front control panel, set the computer select switch 1
to 1 for the computer connected with a 15-pin connector.
Set the computer select switch to 2 for the computer
connected with five BNC connectors.
If only one computer is connected or turned on, set the computer
select switch to the center position. The input signal is auto-
matically determined.
(Continued)
Control Function
Size Button Displays adjustments for picture sizing.
Center Button Displays adjustments for picture position.
Brightness
1. Adjusts Brightness.
2. The −/+ (
Buttons
to OSD screens.
Contrast Buttons
1. Adjusts Contrast.
2. The −/+ (
to OSD screens.
Power Saving LED 1. Green indicates monitor is turned on.
2. Yellow indicates suspend mode.
3. Amber indicates sleep mode.
Power Switch Turns the monitor on and off.
) buttons also make adjustments
) buttons also make adjustments
English 1-9