Yard force AQUAJET LW C02 Original Instructions Manual page 9

20v cordless pressure cleaner
Hide thumbs Also See for AQUAJET LW C02:
Table of Contents

Advertisement

PRODUCT SAFETY WARNINGS
other metal objects such as paperclips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another.
11. Only use the authorised battery pack by maufacturer.
model: B0P-SP07-20-ZJ.
Charging
1. Recharge only with the charger specified by the
manufacturer. Do not use the original charger on other li-
ion batteries or on any other type of battery as this can
increase the risk of fire or explosion.
2. Check the battery charger, cable and plug before
each use. Do not use the battery charger if damaged. Do
not open the battery charger yourself; charger must be
repaired by qualified personnel using original spare parts.
3. The charger is designed to use a standard household
230-240 V~ 50/60Hz power source, ensure that the plug
matches the outlet.
4. Never modify the plug in any way, this will reduce the
risk of electric shock.
5. Do not abuse the cord of charger. Never use the cord
for carrying, pulling or unplugging the charger. Keep the
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
6. Make sure the charger cord is situated so that it will
not be stepped on, tripped over or get damaged.
7. Keep the battery charger clean. Contamination can
increase the risk of electric shock.
8. Protect the battery charger from rain and moisture. If
water accesses the battery charger there is an increased
14
PRODUCT SAFETY WARNINGS
risk of electric shock.
9. Battery will heat up whilst charging. To reduce the
risk of fire, do not operate battery charger on flammable
surfaces such as paper or textiles.
11. Only use the authorised charger by maufacturer.
model: B0Q-SP06-20ZB.
Maintenance and storage
• Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) and check for damage after use.
• Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) before carrying out maintenance or cleaning work.
• Leave the hose connected to the appliance and spray
gun while the unit is pressurised. It is dangerous to
detach the hose while the unit is pressurised.
• Use only the manufacturer's recommended replacement
parts and accessories.
• Inspect and maintain the product regularly. Have the
product repaired only by an authorised service centre or
similar qualified specialist.
• When not in use, store the product out of the reach of
children.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low vibration and low
noise operating modes as well as wearing personal
protective equipment.
15

Advertisement

Table of Contents
loading

Table of Contents