Table of Contents
Advertisement
PRODUCT SAFETY WARNINGS
Take the following points into account to minimize the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Keep tight grip on the handles/gripping surface.
4. Maintain this product in accordance with these
i n s t r u c t i o n s a n d k e e p i t w e l l l u b r i c a t e d ( w h e re
appropriate).
5. Plan your work schedule to spread any high vibration
tool use across a longer period of time.
Servicing
• Have your tool repaired by an authorised service agent.
This tool is manufactured in accordance with the relevant
safety regulations. To avoid danger, equipment must only
be repaired by qualified technicians.
• Only use parts and accessories made for this appliance
by the manufacturer. Failure to do so can result in per-
sonal injury.
16
SYMBOLS
Safety symbols
The purpose of safety symbols is to attract your
attention to any possible dangers. The safety symbols
and their explanations deserve your careful attention
and full understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitute for proper accident
prevention measures.
WARNING: Be sure to read and understand
all safety instructions within this operator's
manual, including all safety alert symbols such as
"DANGER", "WARNING", and "CAUTION" before
using this tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
SAFETY ALERT SYMBOLS: Indicate DANGER,
WARNING, or CAUTION. May be used in conjunction
with other symbols or pictographs.
Symbol meanings
This page depicts and describes safety symbols that may
appear on this product. Read, fully understand and follow
all instructions on the appliance before attempting to
assemble and operate.
17
Advertisement
Table of Contents
