Related Manuals for Yard force LW CPC1
Summary of Contents for Yard force LW CPC1
- Page 1 LW CPC1 Q0QS-SP02-220 20V CORDLESS PATIO CLAENER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
- Page 3 1200 rpm 1400 rpm...
-
Page 4: Table Of Contents
INTENDED USE LW CPC1 Original Instructions Use the device only on pre-cleaned surfaces and observe the safety instructions. The device is intended for the removal of soiling from outdoor surfaces, such as e.g. terraces. The device is suitable for wooden, stone or composite material (WPC) surfaces, according to CONTENT the brushes used. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety Electrical safety 1. Power tool plugs must match the outlet. Never modify 1. Stay alert, watch what you are doing and use the plug in any way. Do not use any adapter plugs common sense when operating a power tool. - Page 6 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS extraction and collection facilities, ensure these are tool repaired before use. Many accidents are caused connected and properly used. Use Of dust collection by poorly maintained power tools. can reduce dust-related hazards. 6. Keep cutting tools sharp and clean. properly 8.
-
Page 7: Product Safety Warnings
GENERAL SAFETY WARNINGS PRODUCT SAFETY WARNINGS burns or a fire. connecting this product to the drinking water network 4. Under abusive conditions, liquid may be ejected from and contact your sanitation specialists if you have the battery; avoid contact. If contact accidentally any queries. -
Page 8: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS Maintenance and storage Safety symbols 1. Keep all nuts, bolts and screws tight to be sure the The purpose of safety symbols is to attract your attention product is in a safe working condition. to possible dangers. The safety symbols and the explanations with them require your careful attention 2. - Page 9 SYMBOLS SYMBOLS This symbol, before a safety comment, indicates Ensure that other people and pets remain at least a precaution, a warning or a danger. Ignoring 15m away from the device when it is in use. this warning can lead to an accident for yourself or for others.
- Page 10 SYMBOLS SYMBOLS Warning symbols on the battery pack Warning symbols on the charger To reduce the risk of injury, user must read the To reduce the risk of injury, user must read the instruction manual carefully. instruction manual carefully. Do not throw into water. The charger is for indoor use only.
-
Page 11: Technical Data
TECHNICAL DATA DESCRIPTION OF PRODUCT Parts description (Fig. A) Model LW CPC1 Power ON/OFF trigger Safety lock off button Mains voltage 20 V Control panel Main handle No load speed 1200/ 1400 min Auxiliary handle Aluminum tube Working width 200 mm... -
Page 12: Operation
OPERATION OPERATION Installation To obtain the best life from the battery Never allow the battery to completely discharge before recharging. The battery pack should be placed on the charger whenever the battery pack is noticeably running down Assembly of the handle and housing or the tool no longer performs a task it previously performed. -
Page 13: Maintenance And Storage
OPERATION MAINTENANCE AND STORAGE Overload warning indicator (Fig. L) WARNING: Before performing any repair work, always remove the battery pack and This machine equipped with an overload warning indicator, the indicator will flashing when: wait until the cutting blade has come to a standstill. - The patio cleaner is overloaded. - Page 14 United Kingdom Declare that the product: Description: 20V Patio cleaner Fault/malfunction Cause Remedy Model No. LW CPC1/ Q0QS-SP02-220 Battery pack not properly Attach properly Function: Floor cleaning attached Remove and charge the battery Battery pack discharged...
-
Page 15: Declaration Of Conformity
59 bis Rue du Mûrier 37540 Saint Cyr Sur Loire, France Declare that the product: Description: 20V Patio cleaner Model No. LW CPC1/ Q0QS-SP02-220 Function: Floor cleaning Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/EC...