Bearing Frame Overhaul Tools; Mechanical Seal Change-Out Tools; Ordering Parts - GE OSMONICS TONKAFLO SS Series Installation, Operation And Maintenance Manual

10.6

Bearing Frame Overhaul Tools

1. Two 5/16-inch x 18 UNC x 2-1/2-inch-long bolts for removal of grease seal
holder (E-Bearing frame pumps).
2. One 3/8-inch bolt for E-Bearing frame pumps to hold bearing frame shaft when
removing lock nut.
3. One 3/16-inch Allen (hex) wrench for removal of bearing frame shaft set screw.
4. Bearing press (arbor press).
5. Dial indicator for setting bearing frame shaft end play.
6. Retaining ring pliers for removal of retaining ring from E-Bearing frame shaft
(Truarc L1520 or equivalent).
10.7

Mechanical Seal Change-Out Tools

1. One 3/16-inch Allen (hex) wrench for removal of bearing frame shaft set screw
2. 9/16-inch wrench
10.8

Ordering Parts

Order parts through your local distributor or directly from:
GE Infrastructure
Water & Process Technologies
5951 Clearwater Drive
Minnetonka, MN 55343-8995 USA
Telephone:
Fax:
Toll Free:
To order parts, the following information is necessary:
1. Pump model number (see pump label)
2. Pump serial number (see pump label)
3. Other nameplate information such as operating temperature, materials of
construction, or material code and type of mechanical seal
4. Motor horsepower, motor frame size, and enclosure specification
5. Part name
6. Part number
7. Quantity desired
8. Specific materials of construction, if any.
(952) 933-2277
(952) 933-0141
(800) 848-1750
37