Operation And Display Of The Switch; Lock - Panasonic ES‑ST3N Operating Instructions Manual

►Using the trimmer
Slide the trimmer handle up. Place at a right
angle to your skin and move downwards to
trim your sideburns.
►Tips for better usage
Apply the trimmer edge perpendicular to skin and move
downward.
Trimming sideburns
►Notes
• The "shaving sensor", which automatically adjusts the power
depending on the beard thickness, will operate.
It will shave with high power on areas where the beard is
heavy, and reduce the power on areas where the beard is
thin, to reduce burden on the skin.
• Before shaving, check that the cleaning shutter is closed.
• After wet shaving, wash the main body with water and apply
oil to the system outer foil.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not
react and the driving sound may not change. This is not
abnormal.
Pre‑shave of long beards
• The appliance may not operate in an ambient temperature
lower than approximately 5 °C.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• To prevent erroneous operation, place your fingers on the
finger rest while using the shaver.
Operation and display of the switch lock
►Locking the power switch
1. Press once 2. Press
and then more than
release. 2 seconds.
• The shaver • The switch lock
starts operating. lamp (
light up for
5 seconds and
turn off.
• The shaver will
stop operating.
for 3. Release .
) will
15