Options
SATA Drivers Configuration
Chipset SATA
SATA Mode Selection
SATA Test Mode
Aggressive LPM Support
Miscellaneous Configuration
State After G3
Description
This item can enable or disable the chipset SATA controller. The
chipset SATA controller support the 2 black internal SATA ports
(up to 3Gb/s supported per port).
The user can determine how SATA controller(s) operate. It can
support AHCI and RAD mode. This item is AHCI mode by default.
Test mode enable/Disabled.
The user can enable PCH to aggressively enter link power state.
Enabled. This item is enabled by default.
Disabled.
State After G3 means after restore power supply.
S5 State (Default): If set it as S5 State, it means the system
will remain shutdown state
S0 State: If set it as S0 State, it means the system will be
power on automatically.
Last State: If set it as Last State, it means the system will
keep State of last setup.
- 27 -