Daewoo Cyclone Freedom Pro User Manual page 6

1. Grasp the vacuum cleaner firmly by the
Handle (6) and press the On/off Trigger
Switch (7) to power up the cleaner.
2
3
4. If the Aluminium Tube (17) is not required,
the Motorised Floor Tool (12) can be
attached directly as shown right for cleaning
hard to get at areas such as stairs, car seats,
etc.
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1
2. During use, press the Min/Max Power Button
(8) to select between minimum or maximum
suction power.
3. Place your foot gently on the Motorised Floor
Tool (12) and pull the cleaner back by the
Handle (6) and start vacuum cleaning.
Press the On/off Trigger Switch (7) again at
the end of cleaning to switch the cleaner off.
4
Cyclone Freedom Pro 22.2V Cordless Vacuum
FLR00040
User Manual
6