Daewoo Cyclone Freedom Pro User Manual page 4

Before the first time you use your Cordless Vacuum Cleaner
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows:
1. Insert the Small Power Plug (15) of the Mains Charger (16) into the Charging Socket (5).
2. Plug the Mains Charger (14) into the nearest mains socket.
3. The Charging/Battery Indicators (9) will light in the sequence as in a, b, c below to show
the internal battery is charging.
4. Once the battery is fully charged (after approximately 5 hours), the Charging/Battery
Indicators (9) will all light as in 'c' below showing that the internal battery is fully charged
and the Mains Charger (16) can be removed.
Attaching the Accessories
CAUTION Ensure that the vacuum cleaner is not connected to the mains charger before use.
The Floor Attachment
1. Push the Aluminium Tube (17) onto the Air/Dust Inlet (1) until it clicks home as shown
below:
2. Push the Motorised Floor Tool (12) onto the other end of the Aluminium Tube (17) again
until it clicks home.
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
a.
b.
Cyclone Freedom Pro 22.2V Cordless Vacuum
c.
FLR00040
User Manual
4