Trip Control Button; New Mission; Exit Trip; Start Of Journey Procedure - Fiat DOBLO 2016 Owner's Handbook Manual

Trip time
Time elapsed since the start of the new
journey.
IMPORTANT If there is no information,
the Trip computer displays "----" in
place of the value. When normal
operating conditions are restored, the
counting of the various values is
resumed, without either zeroing the
values displayed prior to the problem,
or starting a new mission.

TRIP control button

The TRIP button is located at the end of
the right stalk fig. 118. With the ignition
key turned to MAR, this button allows
you to view the previously described
values and also zero them to begin
a new journey:
brief press to access the various
values displays;
long press to reset and then start a

new mission.

New mission
This begins after a reset:
"manual" resetting by the user, by
pressing the relevant button;
118
"automatic" resetting, when the
distance travelled reaches 3,999.9 km
or 9,999.9 km (depending on the type
of display) or when the travel time
reaches 99.59 (99 hours and 59
minutes);
after disconnection/reconnection of
the battery.
IMPORTANT The reset operation when
"Trip A" details are being displayed
only resets the information associated
with this function.
IMPORTANT The reset operation when
"Trip B" details are being displayed
resets only the information associated
with this function.

Start of journey procedure

With the ignition key in the MAR
position, reset by pressing the TRIP
button and keeping it pressed for more
than 2 seconds.

Exit Trip

You can automatically exit the TRIP
function once all the values have been
displayed or by holding the MENU
F0V0010
button (*) down for more than 1
second.
(*) For versions/markets where
provided.
WARNING
11) The "Trip B" function may be disabled
(see paragraph "Activating Trip B").
"Range" and "Instantaneous fuel
consumption" parameters cannot be reset.
81