Repositioning 3Rd Row Seats; Front Bench - Fiat DOBLO 2016 Owner's Handbook Manual

remove the seat from the
attachments on the floor.
REPOSITIONING 3RD
ROW SEATS
Proceed as follows:
attach the hooks to the floor fig. 36;
36
push the lever as illustrated in fig.
35 and pull it to make sure that the seat
is still correctly secured;
withdraw the head restraint under
the cushion;
fold the cushion and the backrest
over;
reposition the head restraint;
re-position the rolling curtain in its
housing.
IMPORTANT Make sure that the seat is
properly secured to the fastenings on
the floor and that the lever A fig. 33
is tightened (red band not visible).
26

FRONT BENCH

(for versions/markets, where provided)
15)
Some versions feature a front bench
with central and side passenger
backrests that fold down to a table.
To fold down the backrests, pull tabs A
or B fig. 37 to fold down the central
or side section of the backrest
respectively fig. 38.
F0V0207
37
38
The central backrest features a
retaining clip that can be used to hold
documents.
IMPORTANT Before folding down the
central backrest, you need to
completely lower the head restraint to
prevent it from interfering with the
gear lever in certain driving conditions.
By pulling tab C fig. 37, you can also
raise the single central and side seat
cushion to access a dedicated storage
compartment fig. 39.
F0V0550
39
F0V0551
F0V0552