Climate Control Off Button; Driver Temperature Control Down Butto - Fiat Freemont Owner's Handbook Manual

• Floor Mode
KNOWING
Air comes from the floor outlets. A slight
YOUR
amount of air is directed through the defrost
VEHICLE
and side window demister outlets.
• Mix Mode
SAFETY
Air comes from the floor, defrost and side win-
dow demist outlets. This mode works best in
cold or snowy conditions.
STARTING
AND
• Defrost Mode
DRIVING
Air comes from the windshield and side window
WARNING
demist outlets. Use Defrost mode with maxi-
LIGHTS
mum temperature settings for best windshield and side
AND
window defrosting and defogging. When the defrost
MESSAGES
mode is selected, the blower level may will increase.
IN AN

13. Climate Control OFF Button

EMERGENCY
Press and release this button to turn the Climate
Control ON/OFF.
SERVICING
14. Driver Temperature Control Down Button
AND CARE
Provides the driver with independent temperature
control. Push the button for cooler temperature set-
tings.
TECHNICAL
SPECIFICATIONS
NOTE: In Sync mode, this button will also automati-
cally adjust the passenger temperature setting at the
same time.
CONTENTS
78
15. Driver Temperature Control Up Button
Provides the driver with independent temperature
control. Push the button for warmer temperature
settings.
NOTE: In Sync mode, this button will also automati-
cally adjust the passenger temperature setting at the
same time.
16. Temperature Control (Uconnect® 4.3 Only)
Press the temperature soft-key to regulate the tem-
perature of the air inside the passenger compartment.
Moving the temperature bar into the red area, indicates
warmer temperatures. Moving the temperature bar
into the blue area indicates cooler temperatures.
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the opera-
tor to manually activate or deactivate the air condition-
ing system. When the air conditioning system is turned
on, cool dehumidified air will flow through the outlets
into the cabin. For improved fuel economy, press the
A/C button to turn off the air conditioning and manu-
ally adjust the blower and airflow mode settings. Also,
make sure to select only Panel, Bi-Level or Floor
modes.