Fiat DOBLO 2016 Owner's Handbook Manual page 163

184
185
for versions with alloy rims, remove
the press-fitted hub cap;
186
loosen the fixing bolts of the wheel
to be replaced by about one turn, using
the spanner provided;
remove wedge D from the tool bag
and open it as shown in fig. 187;
F0V0150
187
place the wedge D behind the wheel
diagonally opposite the one you want
F0V0151
to replace fig. 188 to prevent the
vehicle from moving when it is raised.
188
F0V0193
operate the jack using the knob
(release the handle from the clip and
the hole on the nut) in order to open it
partially fig. 189, then position it under
the vehicle in line with references A
fig. 190 near the wheel to be changed.
F0V0192
189
operate the jack with the knob to
open it until the groove A fig. 191 of the
jack is correctly inserted in the lower
profile B on the side member:
F0V0153
F0V0154
159