Attachments - IKA KS 4000 i control Operating Instructions Manual

Error code Description
PC 1 In remote operation (PC) with
watchdog function 1 enabled:
No communication between
PC and unit
PC 2 In remote operation (PC) with
watchdog function 2 enabled:
No communication between
PC and unit

Attachments

The following attachments are offered as accessories
AS 4000.1 universal attachment
The attachments are affixed to the shaking table using the four clamping screws provided.
Load (standard values)
Load / kg 6
Max. speed / rpm 500
26
Cause
• PC does not send data during the
watchdog time
• The connection/cable to the PC is
broken
• PC does not send data during the
watchdog time
• The connection/cable to the PC is
broken
AS 4000.2 bracket attachment
12 15 20
400 300 120
Effect
Heating off
Motor off
The setpoint temperature • Change the watchdog time
is set to the WD safety
temperature
The setpoint speed
is set to the WD safety
speed
AS 4000.3 bowl attachment
Solution
• Change the watchdog time
• Send data from the PC within the
watchdog time
• Check the connector cable and plug
• Send data from the PC within the
watchdog time
• Check the connector cable and plug
Assembly information for AS 4000.1
KS 4000 i 1208