Bissell PROHEAT 2X REVOLUTION MAX PROFESSIONAL User Manual page 7

Filling Your Clean Water Tank (cont.)
4
At the bottom of the Upper Handle, align
the Clean Water Tank with the grooves and
slide the tank into place.
NOTE: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL®
formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN
MICROWAVE. When using BISSELL Wash & Remove + Antibacterial formula: Only fill your
Clean Water Tank with the recommended amount of water and formula to achieve anti-
bacterial benefits.
Cleaning Formula
1
The Clean Water Tank is at
the top of the machine. Lift
the tank straight up to remove
from the machine.
3
Pour in more power with BISSELL Oxy Boost
• Fill tank with water and BISSELL formula (Step 3 above).
• Add 60 mL of BISSELL Oxy Boost per 3.7 L of water.
• The ProHeat® 2X Revolution® has a 3.7 L Clean Water Tank.
NOTICE: Do not overwet carpet. Be careful not to run over loose objects or edges of area
rugs. Stalling the brush may result in premature belt failure.
2
At the bottom of the
Upper Handle, align the
Clean Water Tank with
the grooves and slide
the tank into place.
For Future Use with Full Size
Antibacterial Formula:
After filling the Clean
Water Tank with warm
tap water, twist the
yellow tank cap back into
place. Firmly insert the
full size formula bottle
into the cap on the Clean
Water Tank and squeeze
until formula reaches the
Easy Fill line.
NOTE: Fill with warm
(140°F/60°C MAX) tap water
and add the appropriate
BISSELL® formula. DO NOT USE
BOILING WATER. DO NOT
HEAT WATER OR TANK IN
MICROWAVE. Do not substitute
BISSELL Formula cleaning
solution with other household
cleaning products.
www.BISSELL.com.au
Unscrew the cap
from the Clean Water
Tank. Add warm tap
water to the water
fill line. Add desired
formula to the formula
fill line. After formula
is added, secure the
tank cap in place.
7