Page 2
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents.
Installing a Camera Lens Installing on the Aircraft Gimbal Rotating Range Compatible Lenses Lens Specifications Mounting Filters/Protector Remote Controller Controls DJI Pilot App Controls Basic Features Camera Mode Settings Enterprise Applications Smart Oblique Description Nap-Of-The-Object Photogrammetry Description Flight Mission Usage...
Product Profile Introduction The Zenmuse P1 integrates a 45MP full-frame sensor, a global mechanical shutter, and an interchangeable fixed-focus DJI DL Lens (ENTERPRISE) on a 3-axis stabilized gimbal. Designed to be used with compatible DJI aircraft and DJI TERRA for photogrammetry flight missions, the P1 takes efficiency and accuracy to a whole new level.
MATRICE 300 RTK Supported Lenses The P1 currently supports the following lenses when used with the DJI DL-Mount and will support additional lenses in future. DJI DL 24mm F2.8 LS ASPH Lens (ENTERPRISE) DJI DL 35mm F2.8 LS ASPH Lens (ENTERPRISE) DJI DL 50mm F2.8 LS ASPH Lens (ENTERPRISE)
ZENMUSE P1 User Manual 1 3 1 3 5. Rotate the camera lens counter-clockwise after mounting the lens to make sure the lens is firmly attached. DO NOT press the lens release button while attaching the lens. Mount the camera lens with the lens mount facing downward to prevent dust from entering the sensor.
ZENMUSE P1 User Manual Gimbal Rotating Range The 3-axis gimbal provides a stable and mobile platform for the camera system to capture smooth images and videos. The tilt, pan, and roll ranges are listed below. + 40° + 55° 0°...
Compatible Lenses DJI DL Enterprise Lenses are compatible with the DJI DL-Mount, which has a diameter of 58 mm. The focal lengths of the three DJI DL Enterprise lenses are 24mm, 35mm, and 50mm. The built-in mechanical global shutter supports an exposure time of up to 1/2000 s.
ZENMUSE P1 User Manual Mounting Filters/Protector 1. Rotate and remove the lens hood. 2. Rotate and remove the balancing ring. 3. Mount the new filter or protector and the lens hood. When mounting the lens hood, first align the small red dot on the lens hood with the red dot on the lens and rotate the lens hood to align the large red dot with the dot on the lens.
Press to start or stop recording video. 3. Shutter Button Press to take a photo. The photo mode can be set to single or interval in DJI Pilot. Single photos can also be taken during video recording. 4. Right Dial Turn to adjust the pan of the gimbal.
DJI Pilot App Controls The touchscreen interface can be used to capture photos, record videos, and view playback. Professional photography configurations are also available. Basic Features 26.1v In-Flight (RTK) 5.8G 100% 26.1v 19:29 Shutter Shutter AF/MF 1/1000 1/1000 3468 3468 MENU 05.2...
ZENMUSE P1 User Manual 8. Manual Focus Slider Tap to adjust the position of the camera focus. 9. Shooting Button (Shutter/Video Record) Tap to shoot photos or start or stop recording. 10. Playback Tap to enter and preview photos and videos as soon as they are captured.
ZENMUSE P1 User Manual Nap-Of-The-Object Photogrammetry Description For nap-of-the-object photogrammetry, it is recommended to set the camera to M mode and to calibrate the infinity focus point. Adjust the shutter speed and aperture, enable auto ISO, and set the metering mode to global metering.
Tap and drag on the map to adjust the area that will be scanned and tap “+” to add a waypoint. 2. Edit parameters: A. Select Zenmuse P1 (35mm) as the camera type according to the lens type. A 35mm lens is used as an example.
Tap and drag on the map to adjust the area that will be scanned and tap “+” to add a waypoint. 2. Edit parameters: A. Select Zenmuse P1 (35mm) as the camera type according to the lens type. A 35mm lens is used as an example.
+ to add a waypoint. 2. Edit the parameters: A. Select Zenmuse P1 (35mm) as the camera type according to the lens. A 35mm lens is used as an example. B. Set the gimbal pitch (oblique), altitude, takeoff speed, route speed, and action upon completion.
Tap and drag on the map to adjust the area that will be survyed and tap + to add a waypoint. 2. Edit the parameters: A. Select Zenmuse P1 (35mm) as the camera type according to the lens. A 35mm lens is used as an example. B. Edit the parameters for a Linear Flight mission or Waypoint mission.
DewarpData Camera parameters for dewarping (the calibration file must be imported and calibrated in DJI Terra for the data to be generated): Parameter sequence - fx, fy, cx, cy, k1, k2, p1, p2, k3 fx, fy - Calibrated focal length (unit: pixel)
ZENMUSE P1 User Manual 1. Photo series number: the series number of the image log file stored in this folder. 2. GPS TOW: when the photo was taken expressed in GPS TOW. 3. GPS Week: when the photo was taken expressed in GPS week.
DJI devices used with the aircraft, and that all devices are powered on. 2. Go to HMS in DJI Pilot, select Firmware Update, then Zenmuse P1, and follow the on-screen instructions to update the firmware. All available devices can be updated at the same time by selecting Update All.
Page 27
ZENMUSE P1 User Manual Photo: 100-25600 ISO Range Video: 100-25600 Video Format 16:9 (1920×1080) Video Resolution 16:9 (3840×2160) ③ Frame Rate 60 fps 云台 Stabilized System 3-axis (tilt, roll, pan) Angular Vibration Range ±0.01° Mount Detachable DJI SKYPORT Tilt: -125° to +40°...
Need help?
Do you have a question about the ZENMUSE P1 and is the answer not in the manual?
Questions and answers