Mercedes-Benz E-Class Owner's Manual page 476

Service products and capacities
474
Assuring the purity of AdBlue
important with respect to avoiding malfunc-
tions in the BlueTEC exhaust gas aftertreat-
ment system.
®
If AdBlue is pumped out of the AdBlue
e.g. during repair work, do not use this fluid
to refill the tank. The purity of the fluid can no
longer be guaranteed.
Capacities
Missing values were not available at the time
of going to print.
Model
E 220 BlueTEC
E 300 BlueTEC
E 350 BlueTEC
E 350 BlueTEC 4MATIC
Engine oil
General notes
Comply with the important safety notes for
service products when handling engine oil
( Y page 469).
The quality of the engine oil is decisive for the
function and service life of an engine. After
extensive tests, Mercedes-Benz approves
engine oils that correspond to the current
technical standard.
Therefore, only Mercedes-Benz approved
engine oils may be used in Mercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Benz Service Centre. Mercedes-
Benz recommends that you have the oil
change carried out at a qualified specialist
workshop. Mercedes-Benz approval is indica-
ted on the oil container by the inscription "MB
Approval" and the corresponding designa-
tion, e.g. MB Approval 229.51.
® You can call up an overview of approved
is particularly
engine oils on the Internet at:
http://bevo.mercedes-benz.com by enter-
ing the designation, e.g. 229.5.
The table shows which engine oils have been
®
tank,
approved for your vehicle.
Petrol engines: in certain countries, differ-
ent engine oils can be used, provided that the
maintenance intervals are reduced. For more
information, please contact a qualified spe-
cialist workshop. Missing values were not
available at the time of going to print.
Petrol engines
Total capacity
AMG vehicles
All models
25.5 l
24.5 l
Diesel engines with
diesel particle filter
All models
Use only SAE 0W-40 or SAE 5W-40 engine oils
for AMG vehicles.
i
Capacities
The following values refer to an oil change
including the oil filter.
If the engine oils listed in the table are not
available, you may add the following engine
oils until the next oil change:
vehicles with a petrol engine: MB
R
Approval 229.1, 229.3 or ACEA A3
diesel engines: MB Approval 229.1,
R
229.3, 229.5 or ACEA C3
This must only be added once and the
amount must not be greater than 1.0 l.
MB Approval
229.5
MB Approval
228.51,
229.31, 229.51